Vertical 9112i User Manual Download

Page: 47 / 146

Call Park

Using Wave Phone Features

Wave Phone User Guide

DIGITAL PHONES

To system park a call

While on a call:

Press

System Park

If you do not have a programmed

System Park

key, press

Flash

, then *62 to park a call.

Listen for two short beeps, and hang up.

The display shows the parking slot number where the call is parked. Be Sure that you
remember this number since you’ll need to use it to retrieve the call.

The

System Park

red LED remains lit until the parked call is retrieved.

If you leave a call parked for a long period of time, your phone rings back, and

PARK

displayed.

Note:

Even while a call is parked from your phone, and the

System Park

button’s red LED

is lit, you can still query parking slot of the last call parked from your phone by pressing

, then the

System Park

button.

To retrieve a call parked on the system

From any extension:

Press

System Park

If you do not have a programmed

System Park

key, dial *63.

Dial the parking slot number on which the call was parked.

ANALOG PHONES

To system park a call

With a party on the line:

Press

Flash

, then

66.

Listen for two beeps.

Hang up.

Note:

You can also use the method shown below:

With a party on the line, press

Flash

, then 6.

Listen to the system prompt for the slot number.

Summary of Contents for 9112i



















































































































































Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands

Vertical 9112i, User Manual

Search results

Summary of Contents for 9112i

Reviews:

Related manuals for 9112i

Brands by name

Popular brands