1
The storage shelf rails are extended to full length in the shipping container. It
is easier to install the rails when they are at their shortest length.
2
Use the four adjuster screws on the inside of the rail to increase or decrease
the rail length.
3
Identify the left and the right rails which are labeled LH (left-hand) or RH
(right-hand) on the front inside of the rail.
Note the ledge at the bottom of each rail. The storage shelf sits on the ledges
which must be positioned on the inside of the rack. The ledges must not be
located between the rail and the rack wall.
4
Locate the pins on the front and the rear of the rails.
29
Hardware installation procedures
Installing a storage shelf
