15
Remove the hub caps from both sides of the front of the storage shelf.
The caps snap off without any tools.
16
Warning:
The shelf weighs 61.56kg (135.72lbs) without disk drives. Use a
mechanical lift or have at least three people hold the lifting straps. Do not
discard the straps in case you need to move the shelf later.
Warning:
The back end of the storage shelf is heavier than the front end.
From the front of the rack, carefully lower the storage shelf onto the rail ledges
in the rack.
17
Push the shelf into the back of the rack.
18
On the front of the rack, use a long screw and two washers in the top and the
bottom holes.
Place the washer with a gap onto the screw first.
35
Hardware installation procedures
Installing a storage shelf
