■
Item 1 - IPMI (remote management) port
■
Item 2 - eth0/NIC1 port (for laptop connection)
■
Required for the initial configuration and operation of the Access cluster.
■
The default IP address for this private network port is 192.168.229.233.
■
The default login credentials are:
User name:
admin
Password:
P@ssw0rd
■
Item 3 - eth1/NIC2 port
Each of these ports requires a Cat5 (minimum) Ethernet cable.
Use the Access appliance shell menu to configure, manage, and monitor the
appliance-specific software and hardware of each node and the storage. The Access
appliance shell menu is accessed locally or remotely on each node using the
following methods:
■
SSH
■
Veritas Remote Management Console (virtual KVM)
■
Physical keyboard and monitor
The common tasks that you can perform in the Access appliance shell menu include:
■
Initial configuration
■
Network configuration
■
Appliance management
Veritas recommends using the IPMI port to establish remote access to the appliance.
The private network address for the eth0/NIC1 port is reserved to provide a direct
connection from a laptop to perform the initial configuration. NIC1 (eth0) is typically
not connected to your network environment.
After initial configuration you can change the NIC1 (eth0) IP address to repurpose
the port.
65
Hardware installation procedures
Connecting to the network
