Compute nodes
2RU each
One storage shelf,
two drawers
5RU total
To help you identify RU spacing, many rack manufacturers use a system of lines
and sequential numbers starting at the bottom of the rack. The front and the rear
of the rack are marked the same to ensure that the rails are installed straight and
level. One RU has three holes. The holes for one RU are typically marked with a
line below the bottom hole and another line at the top hole.
Use the rack templates to determine the mounting locations for all devices.
To determine rack locations for the hardware
1
Determine the total number of rack units (RUs) that you need as follows:
21
Pre-installation requirements
Dimensions and determining rack locations
