Vemco HR2, User Manual

Page: 99 / 212

Diagnostic Information (HR2, VR2Tx, VR2AR, and VR4-UWM receivers only)
l
(A) Noise Samples (dB or mV)
- Noise values are plotted relative to the primary y-axis. You can
access the noise level at any time along the series by moving the cursor over the location on the
plot where you want to see details. Date and Time are also displayed. Noise readings are not
available for VR4-UWM receivers.
l
(B) Tilt and Temperature - Tilt and temperature values are plotted relative to the secondary y-
axis. Select which value you would like to display using the Tilt , Temperature , or None options
at the top right of the plot. You can access tilt or temperature values at any time along the series
by
moving the cursor over the location on the plot where you want to see details. This information
appears along with the Noise Sample and Date and Time described above. Temperature is not
available for VR4-UWM receivers.
l
(C) Resizable - This section is resizable in height internally, using click and drag up or down
action with the resizing grab handle, between the graphs .
Figure 6-6: Diagnostic Information features (HR2 receiver info shown)
90
HR2 Receiver User Guide