Vemco HR2, User Manual

Page: 162 / 212

Step 3 - Insert battery
Insert the battery top end first, as shown. Lower the bottom
end (wire connector end) in, making sure that you don't
pinch the connector wires on the battery tray's bottom plate.
Step 4 - Check that battery is secure
Ensure that the battery is pressed onto its hook and loop
retainer strips, and that it fits tightly between its top and
bottom foam "cushion" retainers.
NOTE:
The connector wires should not be pinched by the
foam bottom retainers.
Step 5 - Wrap tape
Grab the tape end and wrap the tape around the battery and
cradle to secure it.
153
7.1 Replacing the Main Battery