Vemco HR2, User Manual

Page: 71 / 212

The window displays the following information:
l
Importance
level - Levels are low, medium, or high.
l
Fault Description - A brief description of the fault.
l
Fault Code - A code used by VEMCO Support.
l
Recommended
Action
- VEMCO recommended action to take when encountering this fault.
To close the window, click
OK
.
Reset Options
Reboot
In some circumstances it may be necessary to reboot the HR2 receiver. For example, VEMCO Support
may recommend this action to clear a non-critical fault condition. Rebooting the receiver temporarily
powers it off and then powers it back on again.
NOTE:
Rebooting is not the same as initializing, because rebooting does not clear
the receiver's memory.
To reboot the receiver:
1. In the Hardware Status section, click more to display the Reset Options , then click
Reboot .
Figure 3-37: Reboot option
2. A reboot operation warning appears.
62
HR2 Receiver User Guide