Vemco HR2, User Manual

Page: 97 / 212

6.1.3 SELECTION Section Features
The plots in the
Selection
section display data for the selected portion of the
All Data
plot only. This
section provides the following display features.
Binned Detection Data
The top plot in the
Selection
section shows a zoomed in version of the plot in the
All Data
section.
l
(A) Start/End Dates and Times
- The time period covered by the selection. These are displayed
at the top left of the Selection section.
l
(B) Detects
- The selected number of detections (from the
Range Tool
in
All Data
section
above) appears at the top center of the section.
l
(C) Bin Size (Detections per) - Fathom bins your detection counts in the Selection section into
bins of optimal size for the selected date range. The bin size appears at the top left of the plot. To
decrease or increase the bin size, reduce or extend the selected date range by clicking and
dragging a handle on the All Data graph.
l
(D) Pinpointing bin detections - You can access the number of detections in a bin at any time
along the series by moving the cursor over the location on the plot where you want to see details.
Date and Time are also displayed.
l
(E) Resizable - This section is resizable in height internally, using click and drag up or down
action with the resizing grab handle, between the graphs .
Figure 6-4: Binned Detection Data features
88
HR2 Receiver User Guide