Vemco HR2, User Manual

Page: 52 / 212

3. Click Apply Changes . The new thresholds are now set.
4. If done with Tile Display Settings , click Close .
Default Settings
To restore Default Settings
1. At any time, if you want to return to the Default Settings , click Show Defaults .
The default settings will be displayed in the
Tile Display Thresholds
fields.
Figure 3-10: Showing the Tile Display Thresholds defaults
2. The default settings are 40 seconds for HR, and 340 seconds for PPM. These
settings are appropriate for live observation of detections of synctags programmed
with default delay settings (HR 25-35 s, PPM 270-330 s).
3. Click Apply Changes to reset the thresholds to the defaults.
4. If done with Tile Display Settings , click Close .
43
3.3 Live Tiles Tab