Vemco HR2, User Manual

Page: 53 / 212

3.4 HR2 Transmitter Tab
The
HR2 Transmitter Tab
provides transmitter
identification information
and
configuration options
.
Figure 3-11: HR2 Transmitter tab and information
IMPORTANT: Anytime you make changes to settings and attempt to leave the HR2 Transmitter tab
(by going to another tab like Status , for example), the following message will be displayed: " There
are unsaved settings on this page. Would you like to save them now? "
Click Yes to apply the changes, or, No to leave without any changes.
3.4.1 Transmitter Settings
This section displays the current transmitter parameters:
l
Whether the transmitter is ON (transmitting) or OFF (not transmitting).
l
Which transmitter Profile is in use.
l
The
Transmit Power
setting ( Low , Medium , High , Very High )
3.4.2 Transmitter IDs
The HR Transmitter ID and PPM Transmit ID are displayed.
3.4.3 Configure Transmitter
This section provides options to configure your transmitter. Once you make changes and apply them, the
updated settings appear in the
Transmitter Settings section on the left (and also on the Status Tab
under the
Transmitter
heading).
Enable Transmitter checkbox
Check the box to turn the transmitter
ON
, leave it clear for
OFF
.
44
HR2 Receiver User Guide