Vemco HR2, User Manual

Page: 67 / 212

Hardware Version
This field displays the hardware version of the receiver.
Memory Size
This field displays the total memory capacity of the receiver. Note that this number represents the
memory available when the receiver is
completely empty . To view the percentage of this memory
capacity that has been used, go to the
Status Tab
and check
Memory Usage
under the
Vitals
heading.
3.7.2 Serial Communication Options
Setting the Session Baud Rate
The session baud rate is the communication speed in bits per second (bps) between your HR2 receiver
and the Fathom software. Fathom will automatically set the baud rate to an appropriate value based on
the cable you are using. You should only change the setting chosen by Fathom if you experience
communication problems at the selected baud rate.
To set the Session Baud Rate
Click to open the Session Baud Rate list .
Figure 3-31: Session Baud Rate list
Select the desired Baud Rate. The Apply Changes button becomes available.
58
HR2 Receiver User Guide