Vemco HR2, User Manual

Page: 101 / 212

Figure 6-8: Range Selector tool
By default, the tool shows a limited range, from the beginning of the data file. The red arrows in the
image above point to the left and right "handles" that you can use to modify the range. Anytime you
modify the range, the
Selection
section graphs update to display the new range. Try using the tool as
described next, and watch the updated results on the graphs.
To use the Range Selector tool
There are three ways to set the range:
A. Click INSIDE the range selector and drag the range to a different part of the graph.
Figure 6-9: Clicking and dragging the current range to another section of the graph
B. Click on a different section of the graph, and the range tool will settle on that section. The tool
selects the range according to the heading above the graph, such as "October 2016", in this
example.
92
HR2 Receiver User Guide