Vemco HR2, User Manual

Page: 59 / 212

Figure 3-19: Unsaved Settings message
If you click
No
, your settings will remain as they were, and the view changes to your other selected
tab.
Changing Settings
To change settings, either:
l
Click the up or down arrows next to the Hours (h) and/or Minutes (m) boxes, or
l
Click directly in a box and type in a new value.
l
The minimum (combined) value is 0 hour/1 minute.
l
The maximum (combined) value is 24 hours/0 minutes.
If you enter an invalid value, a red frame appears around the settings boxes.
Figure 3-20: Invalid/outside acceptable values
Modify the values to comply with the minimum and maximum ones stated above.
Saving Settings
When you make changes to the Sensor Data Logging Option settings, the Apply Changes button
becomes accessible.
Figure 3-21: Applying Changes
To save your changes, click Apply Changes .
50
HR2 Receiver User Guide