Veichi Electric AC60 series, Manual

Page: 36 / 191

32
Communication wire must be shield twisted-pair,which is separated from the
control wires. RS485 communication modules are plug-in type installation.
RS485 communication modules plug-in type installation as shown in the following
fig.:
On the right side of the connection terminal in the controlboard, there are
a group of jumper terminals J1, J2 and J3 which is chose to work with software
to decide A02 output mode. Usage details are shown in the following fig.:
Jumper name Details specification
J1
Terminal（A02）output selection，when［F-62 set as “0” ，
should J1 short connect，(A02) output pulse frequency.
J2
Terminal（A02）output selection，when［F-62］set as “1”
or“2” ，J2 should short connect， （A02）output 0～20mA as
4～20mA.
J3
Terminal（A02）output selection，when［F-62］set as “3” ，
J3 should short connect， （A02）output 0V～10V.