Veichi Electric AC60 series, Manual

Page: 138 / 191

134
0：Keyboard potentiometer Given by the keyboard potentiometer analog
signal.
1：PID keyboard number given When applied to normal PID，setting by the
［H-16］.
2：Exterior exterminal VS1 Given by the exterior exterminal（VS1） （0V～
10V）analog signal.
3：Exterior exterminal AS Given by the exterior exterminal（AS）（4～
20mA）analog signal.
4：Exterior exterminal VS2 Given by the exterior exterminal（VS2）analog
signal.（[F-48] can not be “1”or “2”）.
5：Exterior pulse signal Given by the exterior exterminal（PUL）pulse
frequency signal.
6：RS485 interface Given by the signal received by RS485 communication
interface.
0. Exterior exterminal（VS1） feedback by exterior exterminal（VS1）（0V～
10V）analog signal.
1. Exterior exterminal（AS） feedback by exterior exterminal（AS）（4～
20mA）analog signal.
2. Exterior exterminal（VS2） feedback by exterior exterminal（VS2）analog
signal.（[F-48] can not be “1”or “2”）.
3. Exterior pulse signal feedback by exterior exterminal（PUL）pulse
frequency signal.
Attention: PID controller given signal source and PID controller feedback
signal source can not be set as the same channel; otherwise PID can not work
normally.
H-13 PID controller feedback
signal sources
Range ：0 ～ 3 Leave factory
value ：1