VeEX RXT3900, User Manual

Page: 370 / 383

information.
Go back to top Go back to TOC
Errors/Alarms (Page 2) - CPRI
Page 2 lists CPRI Errors/Alarms associated with the signal under test. Some options may not be available depending on the
platform and module.
CPRI:
LOS:
Loss of Signal detection in seconds
Code:
8b/10b code violation detected count and rate
RD:
Running Disparity 8b/10b running disparity error
K30.7:
Control word K30.7 detection
LOF:
Loss of framing seconds detected if invalid Z.0.0 sync byte is received
HLOF:
Loss of Hyperframe synchronization seconds
BLOF:
Loss for Basic Frame (NodeB) frame synchronization seconds
SDI:
Service Defect Indication is detected in the Control bytes for L1 inband protocol
RAI:
Remote Alarm Indication is detected in the Control bytes for L1 inband protocol
RLOS:
Remote Loss of Signal is detected in the Control bytes for L1 inband protocol
RLOF:
Remote Loss of Framing is detected in the Control bytes for L1 inband protocol
Alarms and Errors - CPRI (Port 1) / BERT (Port 2)
Errors/Alarms (Page 3) - BERT
Page 3 lists BERT Errors/Alarms associated with the signal under test.
LSS:
Loss of test pattern seconds.
Bit:
Number of test pattern bit errors. Displays count and rate.
Go back to top Go back to TOC
Signal
Signal - Level - Page 1 (Port 1)
RXT-3900 e-Manual D07-00-111P Rev A00