Under the
Service Level OAM
tab, the user has the option of starting the 802.1ag, Y.1731, or G.8113.1 test.
Fill out the given parameters.
MD Name
,
MA Name
,
VLAN
, and
MD Level
input values must match for both connected OAM devices in order for the test to
work. The
Destination MEPID
and
Local MEP ID
must also be inverted for the tests to work.
Tap the box next to 802.1ag, Y.1731, or G.8113.1 to start the selected test. The transmission of OAM PDUs become active as soon
as the checkmark is added to the test.
Service Level OAM (Page 1)
Service Level OAM Configuration Parameters
MAC Source:
Enter the source address of the test set or tap the
MAC Source
button to assign a default MAC address.
MD Format:
Configure the format of the Maintenance Domain Name:
None
: No Maintenance Domain name
MAC+2octet
: User configurable MAC a 2 octets
String
: User configurable ASCII character string
MD Name:
Name of the Maintenance Domain (only for 802.1ag)
MA/MEG Format:
Configure the format of the Maintenance Association name:
VID
: User configurable ASCII character string
String
: User configurable ASCII character string
2
octet
: 2 octet integer
ICC-Based
: User configurable ITU-T Y.1731 ITU Carrier Code (ICC) based
MA/MEG Name:
Enter the name of the 802.1ag MA or Y.1731 MG
Local MEP ID:
Local end point identifier along the path (1 to 8191)
MD Level:
Maintenance domain level (0 to 7)
MEP ID:
End point identifier (1 to 8191)
Primary VLAN ID:
VLAN ID associated with the MA or MEG
VLAN Type:
C-VLAN, S-VLAN, or None
Destination MEP ID:
MEP ID of the MEP end point
Direction
Up:
Inward facing MEP used for MA/MEG with a wider reach (i.e., end-to-end, beyond a single link)
Down:
Outward facing MEP used for MA/MEG spanning a single link
Differences between 802.1ag, Y.1731, and G.8113.1
Selecting
802.1ag
enables Continuity Check Messages (CCM), Loopback Message (LBM) and Link
Trace Message (LTM).
ITU-T Y.1731
provides all of the 802.1ag functionality with additional
performance monitoring capabilities including Frame Loss (LM), and Delay (DM).
ITU-T
G.8113.1
provides further monitoring of MPLS-TP traffic.
IEEE 802.1ag Definitions
RXT-3900 e-Manual D07-00-111P Rev A00
Summary of Contents for RXT3900
