VeEX RXT3900, User Manual

Page: 226 / 383

Mode:
Select an asymmetric test configuration.
Asymmetric Up:
Tests traffic in the upstream direction (local to remote direction).
Asymmetric Down:
Tests traffic the downstream direction (remote to local direction).
Asymmetric Up & Down:
Test traffic in both upstream and downstream direction.
Step 2-6:
Make the following selections for the Controller and Remote units: Layer, IP Address, Subnet, Gateway, and
VLAN tags. Tap on the white fields to edit options. Use the alphanumeric keyboard to input parameters and press
Apply
to save edits.
Input screen
Step 7:
Tap on the check boxes to add local frames. Tap on the
Add Frame
button to add a customized frame size.
Controller - Step 7
Steps 8-11:
Set up and enable/disable tests for the Local unit.
Step 8:
Local Throughput testing setup. See the Throughput section for a description of menu options
Step 9:
Local Frame Loss testing setup. See the Frame Loss section for a description of menu options.
Step 10:
Local Burst testing setup. See the Burst (Back-to-Back) section for a description of menu options.
Step 11:
Local RX Thresholds setup. See the Thresholds section for a description of menu options.
Steps 12-15:
Set up and enable/disable tests for the Remote unit. See Steps 8-11 for information on setting up individual
tests.
Step 16:
Review configuration selections on the summary screen. The option to
Start
testing or
Reconfigure
test settings
becomes available.
Controller Summary Screen
RXT-3900 e-Manual D07-00-111P Rev A00