VeEX RXT3900, User Manual

Page: 175 / 383

Mode:
Select Client from the drop -down menu.
Server:
Type in the destination server address (Test set configured in Server mode or VX1000 server).
Test Duration:
Configures the duration of the voice test file.
Encoding:
Select the codec from the drop -down menu. The voice file transmitted will use the selected encoding. Supported
codecs are G.711 A-law, G.711 μ-Law, G.729 (optional), G.723.1 (optional).
Jitter Buffer:
Enter the size in ms of the jitter buffer. Packets received after this duration, will be discarded and negatively
impact the quality scores. This setting emulates the jitter buffer configured in the IP phones.
Go back to top Go back to TOC
Server Mode
In the Setup tab, for
Mode
, select
Server
from the drop -down menu.
Press
Start
to begin the test. The test set will wait for Client to initiate connection.
VoIP Expert VX1000 - Server Mode
Status
My IP: Automatically detects the IP address of the Ethernet LAN card
Setup
Mode: Select Server from the drop -down menu
Result file path: Select the path where results files will be stored
Note: Results are automatically saved when the test is completed
VoIP Expert VX1000 - Client Mode
VoIP Expert Status
Server
side:
Start the test.
The Server waits for a connection from the Client.
If the server is running on a V100+/V300 series unit, only one Client connection can be active.
If the server is running on a VX1000 server, up to 16 connections can be active simultaneously.
RXT-3900 e-Manual D07-00-111P Rev A00