VeEX RXT3900, User Manual

Page: 108 / 383

10.1.3 Overhead Generator
Tap the Overhead Generator icon to display the OH screens shown below.
SOH
There are three tabs:
SOH TX
, which allows editing of select bytes associated with the Section Overhead. Editing of J0, K1, K2, S1 is permitted
as follows:
Hexadecimal value using pop-up keypad.
Binary values using simple on-screen bit toggle or pop-up keypad.
Convenient drop-down selections. In some instances, the selections will be available over multiple pages.
Note: While programming of most overhead bytes is possible using the OH Generator feature, dedicated functions are available
for Pointer Tasks, Payload Labels, Trace Identifier, APS Testing, TCM testing. In some instances, more advanced editing is
possible using the dedicated functions.
S1 Byte from SOH
POH TX
, which allows editing of select bytes associated with the Path Overhead.
Editing of J1, C2, H4, G1, Z5, and J2, V5, Z6 is permitted as follows:
Hexadecimal value using pop-up keypad.
Binary values using simple on-screen bit toggle or pop-up keypad.
Convenient drop-down selections. In some instances, the drop-down options will be available over multiple
pages.
C2 Byte from POH
RXT-3900 e-Manual D07-00-111P Rev A00