WiFi SA - Frequency
Frequency
This button allows the user to select frequency band for testing
7.5.4 Data Card
To establish an IP connection using a data card, please make sure that the data card is connected on the USB port. Note that only datacards
provided by VeEX are supported and have the driver necessary for connection. The
Data Card
icon, as shown below, will appear at the
bottom of the screen.
Data Card - Setup
1. Press the
Dial Up
key
2. In the IP Tools Setup menu, the Port will be displayed as "Datacard Port." The D for Data icon in the bar on the lower end of the screen
will have a red cross to show that datacard is not connected -
.
Select the
configuration parameters
, then press
Connect
.
RXT1200_Platform_Manual_RevB01
Page 104 of 117
