VeEX RXT-1200 User Manual Download Page 95

Page: 95 / 117

The arrow and box highlighted above signal the user about the unsaved power measurements in queue of the results data.

Selected measurements on checkbox to be saved or removed from intermediary storage

Results saving definition window with OTDR style format user parameters.

Nested Folder Nomenclature

Job ID:

general OTDR-derived measurement parameter that consists the abbreviated task/operation.

Cable ID:

general OTDR-derived measurement parameter that consists of the abbreviated cable type (single fiber (SF)) and other

miscellaneous user-defined characters.

Fiber ID:

general OTDR-derived measurement parameter that consists of abbreviated fiber type (SM/MM) and other miscellaneous user-

defined characters.

Trace ID:

general OTDR-derived measurement parameter that consists of timestamp and VeEX optical ID serial number.

Comments:

a field that can be used to fill in other relevant information to the user and/or not available with the standard VeEX OTDR style

fields.

RXT1200_Platform_Manual_RevB01

Page 95 of 117

Summary of Contents for RXT-1200






















































































































Search results

Summary of Contents for RXT-1200

Reviews:

Related manuals for RXT-1200

Brands by name

Popular brands

VeEX RXT-1200, User Manual

Search results

Summary of Contents for RXT-1200

Reviews:

Related manuals for RXT-1200

Brands by name

Popular brands