PROBA 5
Doc.nr: 190356
Version: 1.0
Page
28
5.2 Test
5.2.1 Panel test
The Panel test provides a simple test of the inputs and outputs. For this, the Proba is removed from the normal
controller mode and placed in a test mode.
The statuses of the inputs and outputs can be read and certain outputs can be put into another setting in order to
be able to test these outputs.
After the test, the Proba can again be put back into the normal controller mode by clicking ‘Restart application’.
See “5.3.4 Restart application” on page 37 about this function.
Fig. 15
Web page Test - Panel test - Start test
