Page
9
PROBA 5
Doc.nr: 190356
Version: 1.0
•
7x Relay contact outputs (Imax. per relay terminal connection 7,5A)
(Approvals and ratings OMRON G2R1 relay (www.omron.com))
Following contacts configurable
1x
Relay SPDT
NO/NC/C
6x
Relay SPST
NO/COM
with shared commons
RS485 Network
: 2x RS485 Network connection with +12Vdc supply output,
Imax total 100 mA.
(Use maximal one +12Vdc supply output).
Use 2x twisted-pair shielded cable min. 0,5mm
2
, max. length 1km
Ethernet
: Ethernet connector to connect PROBA 5 Compact to the Ethernet LAN or to a PC.
•
Use CAT 5e patch cable to connect the PROBA 5 Compact to ethernet LAN
•
Use CAT 5e crossover cable to connect the PROBA 5 Compact direct to PC.
•
Use network cable of type STP.
The PROBA 5 Compact ethernet jack is located on the processor board.
USB connection
: The USB connection is not for standard use.
Terminals
: Push-in terminals
(Approvals and ratings Phoenix Contact
(www.phoenixcontact.com))
•
Processor board:
PCB-part :
MCV1.5/*-GF-3.5
Cable-part : FMC1.5/*-STF-3.5
PCB-part :
PSTM0.5/4-HH-2.5
Cable-part : MSTBV2.5/3-GF
•
Analogue in+out board: PCB-part :
MCV1.5/*-GF-3.5
Cable-part : FMC1.5/*-STF-3.5
•
Digital in+out board
PCB-part :
PSTM0.5/*-HH-2.5
Cable-part : MSTBV2.5/*-GF
•
PCB-part:
MCV1.5/*-GF-3.5
Cable-part:
FMC1.5/*-STF-3.5
* = amount of contacts (2..8 per part)
