Page
17
PROBA 5
Doc.nr: 190356
Version: 1.0
4.6 Defining the IP address of a control panel
When you switch on the touchscreen, the Proba control screen is first displayed. After a few moments, the ‘No
communication’ message is displayed on the screen.
Fig. 7
Control panel - No communication
Press ‘No Communication’ for 10 seconds and then press ‘Close’.
The screen on which you can configure the IP addresses is now displayed.
Fig. 8
Control panel - Configuring IP addresses
Now press the numbers to configure the IP addresses.
Configure the IP address for the control panel at ‘Panel Address’ and the IP address of the Proba with which it
must communicate at ‘MC3 Address’.
PROBA 5
Compact
user manual
See the user guide for
instructions on how to use the
control panel.
