Service, maintenance
161
Protection of electronic
components
In order to avoid the break down of
electronic c om ponents within the electric al
system, never disconnect the ba ttery with
the engine running. N ev er start the engine
while the battery is disc onnected (e.g.
when using jump leads).
The battery must be disc onnec ted from
the vehicle before being charged :
First disc onnec t the neg ative cable and
then the positiv e ca ble. The polarity of the
battery, i.e. the connections for the p ositive
and negativ e cab les, must not be
intercha ng ed.
When reconnecting, first connect the
positive cable and then the neg ative cab le.
To avoid dam aging the v ehicle, do not
make any m od ifica tions to the electrical
system, e.g. connecting additional
consumers or tamp ering with electronic
control units (chip tuning).
Disconnecting / c onnecting the battery
from / to the electrical system
Disconnect the b attery from the vehic le
electrical system before charging :
First detach the negative and then the
positive lead.
Do not rev erse the polarity of the battery,
i.e. do not confuse the terminals for the
positive and negative leads.
When connecting, start with the positive
lead and then connect the negative lead.
Vehicle storage
If your vehicle is to be stored for long
period s w ithout use, w e recommend you
consult your Vauxhall Authorised Repairer
for adv ic e.
9
Warning
Electronic ignition systems generate very
high voltages. Do not touch the ignition
system; hig h voltage can be fatal.
Ofrecido por www.electromanuales.com
