Self-help, vehicle care
140
Front turn signal light
1. Remove bulb hold er from lig ht assembly
by rotating through 90º.
2. Renew bulb.
3. Install bulb holder in light assembly.
Side repeater lig ht
1. Release lig ht clip s from w ing using a
flatblade screwdriver and lift out.
2. Remove b ulb holder from light assembly
by rota ting through 90º and renew bulb.
3. Install bulb holder in light assembly and
install lig ht assem bly into aperture.
Rear b rake, tur n sig nal and tail lights
1. Remov e 3 screws (using the tool sup plied
in the tool kit).
2. Carefully pull light assem bly from
retaining pins on the outer side and
remove.
Ofrecido por www.electromanuales.com
