Vatech PAX-I User Manual Download Page 96

Page: 96 / 137

PaX-i (PCH-2500) User Manual

7. Acquiring CEPH Images

F. Place the ear rods along the patient’s ear canals. Make sure that the ear

rods are comfortably, yet firmly, in place.

30-40

G. Ask the patient to swallow saliva and tilt
his/her neck back 35° - 40° with the mouth
closed until X-Ray exposure is complete.

H. Click the

Ready

button after the patient has been properly positioned. No

X-Ray will be emitted at this point. The CEPH sensor and the 2nd collimator will
move to capturing mode.

I. Proceed to section

7.4: Initiating X-Ray Exposure.

7.2.5

CARPUS Mode

Attaching the CARPUS plate

A. Match the notch on the CARPUS plate
to the end of the nasal positioner.

Nasal positioner

Locking bolt

Fixed bolt

Ruler

Notch

CARPUS Plate

Pi_u272_en_20180514.indd 96

2018-05-14 오전 11:03:29

Summary of Contents for PAX-I










































































































































Search results

Summary of Contents for PAX-I

Reviews:

Related manuals for PAX-I

Brands by name

Popular brands

Vatech PAX-I, User Manual

Search results

Summary of Contents for PAX-I

Reviews:

Related manuals for PAX-I

Brands by name

Popular brands