Vatech PAX-I User Manual Download Page 94

Page: 94 / 137

PaX-i (PCH-2500) User Manual

7. Acquiring CEPH Images

7.2.3

SMV Mode

Follow the procedure below to prepare and position the patient.

A. Widen the distance between the two
ear rods.

B. The nasal positioner should be flipped

to the side and up to prevent it from
obstructing the image acquisition.

C. Guide the patient to the CEPH unit.

D. Ask the patient to stand upright facing
the secondary collimator.

Make sure that the patient’s shoulders are
level and that his/her neck is relaxed.

E. Adjust the height of the unit to suit the
patient by pressing the column up/down
button or switch (optional).

CAUTION

After adjusting the column to suit the height of the patient,

fit the ear rods along the patient’s ear canals.

Nasal positioner

Sensor

Pi_u272_en_20180514.indd 94

2018-05-14 오전 11:03:29

Summary of Contents for PAX-I










































































































































Search results

Summary of Contents for PAX-I

Reviews:

Related manuals for PAX-I

Brands by name

Popular brands

Vatech PAX-I, User Manual

Search results

Summary of Contents for PAX-I

Reviews:

Related manuals for PAX-I

Brands by name

Popular brands