VARI
❋
LITE - VL2200 S
ERIES
S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
7 2
22 - May- 0 1
0 2 . 9 6 7 3 . 0 0 0 1 A
Choose Sequence Mode:
MSEQ
will replay the cues from the master luminaire.
ISEQ
will play the cues from each individual luminaire, if any. In
ISEQ,
if the
number of cues is different, it will only play as many as each luminaire has stored.
The follow time is taken from the master luminaire.
1. Press [Menu].
2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
3. Press [Up] / [Down] arrows until
SEQ
appears. Press [Enter].
4. Press [Up] / [Down] arrows to toggle between
ISEQ
and
MSEQ
. Press
[Enter] to select mode.
To make a sequence AutoPlay at power up:
1. Press [Menu].
2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
3. Press [Up] / [Down] arrows until
Auto
appears. Press [Enter].
4. Use [Up] / [Down] arrows to toggle between
OFF
(the default) and
ON
.
Press [Enter] to select the mode.
To store cues from a console:
1. Clear memory by deleting cues or sequence, if required.
2. Recall cue at the console.
3. From
Cue
menu, set
FLTM
, then at
Stor
store cue. If each luminaire has
separate data then store each cue into each luminaire. The sequence mode to
use in this case would be
ISEQ
.
