M
ENU
S
YSTEM
: C
UES
AND
S
EQUENCES
4
0 2 . 9 6 7 3 . 0 0 0 1 A
22 - May- 0 1
71
To edit or modify a cue:
1. Recall cue to be changed from
PCue
.
2. Change luminaire data to desired levels using
Man
(Manual Command)
functions.
3. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
4. Press [Up] / [Down] arrows until
Mod
appears. Press [Enter]. The number
displayed is the same as the selected cue.
5. Press [Enter] and changes will be saved.
To play cues as a sequence:
1. Press [Menu].
2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
3. Press [Up] / [Down] arrows until
PSEQ
appears. Press [Enter] and the
sequence will play. The active cue will be shown in the display. [Enter] to
start, [Menu] to stop.
To change the follow time in a sequence:
The follow time is stored for each cue individually.
1. Select cue to be changed from
PCue
.
2. Go to
Mod
to modify active cue and press [Enter] to save the change.
3. Set
FLTM
(Follow Time) to desired value (refer to
“Set follow time between
cues:” on page 70
).
To delete a sequence and all cues:
1. Press [Menu].
2. Press [Up] / [Down] arrows until
Cue
appears. Press [Enter].
3. Press [Up] / [Down] arrows until
DSEQ
appears. Press [Enter].
4.
OK?
prompt will appear. Press [Enter] to delete stored sequence.
