VARI
❋
LITE - VL2200 S
ERIES
S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
8 8
22 - May- 0 1
0 2 . 9 6 7 3 . 0 0 0 1 A
Troubleshooting Guide
If a problem is suspected, try recalibrating the luminaire to prompt an error message.
Refer to
“Error Messages” on page 57
for more information. The chart below provides
possible causes and remedies for each message.
CAUTION:
Some troubleshooting is included for reference only. Performing
remedies marked by gray areas will void product warranty. Refer to
“Protecting Your
Warranty” on page 87
.
Table 1: VL2200 Troubleshooting Guide
Error Display
Description
Possible Cause and Remedy
B1M1
Whl2
NoSn
Aux Board 1, Motor 1,
Wheel 2,
Sensor Not Found
Wheel 2 power not connected,
motor not moving
- Connect wheel 2 motor power at
motor
Wheel 2 sensor not connected
- Connect wheel 2 sensor
Wheel 2 movement restricted or
impeded
- Remove obstruction
Wheel 2 sensor is faulty
- Replace wheel 2 sensor
assembly
Aux Board 1 is faulty
Replace aux board
B1M1
Whl2
SAct
Aux Board 1, Motor 1,
Wheel 2,
Sensor Always Active
Wheel 2 power not connected and
wheel 2 aligned with sensor
- Connect wheel 2 power at motor
Wheel 2 not installed on motor
shaft
- Install wheel 2 on motor shaft
Wheel 2 not installed at correct
height on motor shaft
Fully seat wheel 2 as far down the
motor shaft as possible
