VARI
❋
LITE - VL2200 S
ERIES
S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
9 8
22 - May- 0 1
0 2 . 9 6 7 3 . 0 0 0 1 A
CAUTION:
Do not touch gobos with bare fingers. Wear cotton gloves or other
covering while replacing. Clean with glass cleaner and soft cloth if required.
Note:
In some cases it is easier to slide bulkhead partially out of head assembly to
access gobos. To do this, use #2 Phillips screwdriver to turn captive screw one-quarter
turn and slide bulkhead upward. Disconnect motor connections as necessary.
3. Rotate wheel until required gobo is accessible at finger access cutout.
CAUTION:
Do not touch gobos with bare fingers. Wear cotton gloves or other
covering while replacing. Clean with glass cleaner and soft cloth if required.
4. Using fingers, pull gobo out of
wheel.
5. Noting proper orientation of carrier
slot and orienting “black” side of
gobo toward front lens, insert new
gobo into position and push fully into
place.
6. Re-install bulkhead (if applicable)
and re-install removable cover.
Finger Access
Cutout
Gobo
Gobo Wheel
Gobo
Carrier Slot