background image

 D

ESCRIPTION

 : F

EATURES

1

0 2 . 9 6 7 3 . 0 0 0 1   A

22 - May- 0 1

5

Features

Overview

The VL2200 series spot luminaire is available in two 
different configurations - VL2201™ luminaire and 
VL2202™ luminaire. The model number can be found 
next to the power switch.

Standard Features

All VL2200 series spot luminaires have the following 
standard features:

Variable beam focus to soften the edges of gobos or 
spots and enable gobo morphing.

Full field dimmer to allow smooth timed fades and fast blackouts.

A mechanical iris which provides continuous beam size control for both rapid 
beam size changes and smooth timed beam angle changes.

Rotatable gobo wheel which contains five individually rotatable, indexable gobos.

Two, 12-position wheels, each providing 11 easily loaded positions (and 1 open) 
for interchangeable dichroic color and gobo selections.

Power factor corrected arc power supply for a Philips arc lamp.

Control by DMX512 protocol.

Two truss hook brackets for versatile hanging configurations.

Specific Features

Each individual configuration has the following features:

VL2201 Luminaire

400 watt arc source.

Zoom optics system with a zoom angle of 2.8 to one.

Smooth reflector which produces a peaked or flat field.

VL2202 Luminaire

700 watt arc source.

Zoom optics system with a zoom angle of 2.8 to one.

Faceted reflector designed for an optimal flat field.

Summary of Contents for VL2201






























































































































Reviews: