I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
0 2 . 9 6 7 3 . 0 0 0 1 A
22 - May- 0 1
19
Installing in Truss:
1. Using two people, lift luminaire into mounting position.
2. Secure in place with truss hook. Ensure truss
hook hardware that locks hook in place (e.g. wing
bolt) is properly tightened and that luminaire is
fully supported.
3. Attach safety cable (as required) as follows :
a. Connect one end of cable to luminaire handle.
b. Loop at least once around truss/pipe and
attach other end of cable to other handle.
4. Connect power and data cables according to
procedure given in
“Connecting Data and Power” on page 20
.
Safety Cable
Loop at least once.
18.5”
(47cm)
25.375”
(64.5cm)
17.25”
(43.8cm)
19”
(48.3cm)
Head Swing
Diameter
***
***
Safety Cable
:
Recommended for hanging installations.
May be required by local codes.
27.125”
(68.9cm)
*
*
From lens to top of bracket
From lens to base of enclosure
**
**
Handles are
approved for
safety cable
anchor points
