63
Gobo Replacement - Gobo Wheels
Tools:
Philips screwdriver
Overview of Gobos used in VL10 BeamWash
Due to the immense energy and light produced by VL10 BeamWash, Vari-Lite recommends
to users and owners of this fixture follow the guidelines outlined below when loading gobos
in any of the two rotating gobo wheels.
Gobo Use and Positioning
Vari-Lite has purposely selected a set of standard gobos for this fixture and positioned them
within the fixture to offer optimum versatility / performance. The gobos supplied - in the
standard factory configuration - have been tested in their respective original positions to
protect their service life.
Note: For standard factory gobo / gag loads and position, please refer to
“VL10 BeamWash
Gobo/ Effects Control” on page 33
of this manual.
Note: Vari-Lite cannot guarantee the service life of any custom gobos or gags when used in
conjunction with this fixture. Owners and users employing custom gobos and gags do so at
their own risk.
To Install or Replace Gobos
WARNING: Remove power from luminaire before performing maintenance. Gobos may be
HOT after operation. Allow to cool before replacing.
To replace a rotating gobo:
Step 1: Remove power from luminaire.
Step 2: As illustrated in Figure A-2, remove top and bottom head cover by loosening four
Quick Lock screws to access the gobos wheels.
VARI
LITE VL10 BeamWash User’s Manual
Summary of Contents for VL10 BeamWash
