Vari Lite VL10 BeamWash, User Manual

Page: 67 / 85

53
Default State
The menu display’s default state during normal operation is to display the DMX address.
After 40 seconds of inactivity at the display, it will change to the default state.
After longer periods of inactivity, the menu display will switch to its off state. The default
state for this feature is 30 seconds, however, different time lengths can also be programmed.
To program a different time length for menu off feature:
Step 1. Press access the main menu.
Step 2. Once enabled, the menu will function as normal with only the following sub-menu
sections active:
Address
Configure
DMX
Fixture
Manual Control
Test
Step 3. Press choose the “Configure”,and press .
Step 4. Press choose the “Display”,and press .
Step 5. Press choose the “On Time”,and press .
Step 6. Press choose “30 Sec”, “5 Min”, “10 Min”, “On” when you need.
MENU SYSTEM : MENU OPERATION
4