Vari Lite VL10 BeamWash, User Manual, Page: 63 / 85

49
A DMX termination connector is used in this process. Refer to page 16 for more
information regarding the construction of this connector.
Figure 3-6: Software Transfer Setup
Transfer Procedure
This procedure is used to transfer software versions between luminaires.
Step 1. At last luminaire, install DMX termination connector into DATA THRU XLR
connector.
Step 2. At master luminaire (first in chain) Menu Display, press .
Step 3. Press arrows until Fixture appears.
Step 4. Press arrows until Crossload appears. Press .
Step 5. Unplug DMX From Console? will be displayed. Press to accept.
Step 6. Once download is complete, luminaire will automatically recalibrate. Once
recalibration is complete, recalibrate luminaire one additional time.
Verify software version at luminaire:
Step 1. At Menu Display, press .
Step 2. Press arrows until Fixture appears. Press .
Step 3. Press arrows until Version appears. Press .
Part 1 of the version will be displayed as VXXX.
Press to display part 2 of version. This will be displayed as a date (MM/DD/YY).
For example,08/18/ 18 (August 18, 2018).
Press to display part 3 of version. This will be displayed as a time(HH:MM). For
example, 16.36 (4:36 pm)
OPERATION : VL10 BeamWash DMX MAPPING
3