Vari Lite VL10 BeamWash, User Manual

Page: 40 / 85

26
DMX
Parameter
Range DMX
Range
%
Defaults*
Description Notes
16 - Bit
Enhanced
16 -
Bit
39
Beam
Timing
0 - 255 255 255
Adjustment of fixture timing to
control beam shaping mechanisms.
- See Timing Channel Chart in User
Manual
40
Gobo
Timing
0 - 255 255 255
Adjustment of fixture timing to
control gobo mechanisms.
- See Timing Channel Chart in User
Manual
41 36 Luminaire 0 - 255 0 0
Control Channel used for full
fixture settings, lamp controls, and
Control miscellaneous modes.
Set discrete value of desired effect,
wait >3 seconds, then set
value to 0 (Idle).
0 - 5 Idle (Default)
6 - 10 Full Luminaire ReCal
11 - 15 Lamp On
16 - 20 Lamp Off
21 - 25 Fixture shutdown
26 - 30 Display-Menu On
31 - 35 Display-Menu Off
36 - 40 ReCal Position
41 - 45 ReCal Color
46 - 50 ReCal Gobo
51 - 55 ReCal Beam
56 - 60 ReCal Optics
61 - 65 Reserved (Future use)
66 - 70 Reset Fixture to Defaults
71 - 75
Full Luminaire Reboot This
command will douse lamp and reset
all processors in fixture, then ReCal
all parameters.
76 - 80
Fixture Status On/Off. This
command will enable to display to
show fixture status for 5 min. After
this time, display return of default
configurations. Repeating this
command in les than 5 minutes will
behave as a toggle
VARI LITE VL10 BeamWash User’s Manual