Vari Lite VL10 BeamWash, User Manual, Page: 68 / 85

54
Menu Functions
VL10 BeamWash Menu System Function Chart
For easy reference, each possible menu item is listed alphabetically in the first column by its
display abbreviation. The second column follows with a definition of the abbreviation and
then a third column provides an explanation of its purpose and function.
Table 4-1: VL10 BeamWash Menu System Chart
Address 001~512 (Default 001)
Configure
Lamp
Power
OFF (Default)
ON
Power Up
OFF (Default)
ON
Lamp Hours XXXXXX h
Reset Lamp Hour Are you sure?
Pan/Tilt Movement
Enable (Default)
Disable
Head Motors Movement
Enable (Default)
Disable
Display
Orientation
Auto (Default)
Up
Down
On Time
30 Sec
5 Min (Default )
10 Min
On
Reset Defaults Are you sure?
Select Signal DMX Only (Default)
Art-Net On IP2
Art-Net On IP10
Set Artnet
Set Universe 000~255
(Default 000)
Ethernet IP
XXX. XXX. XXX. XXX
Ether Mask IP
XXX. XXX. XXX. XXX
DMX
Data
Channel 1 - Intensity = XXX (Value)
Channel 2 - Intensity Fine = XXX (Value)
……
Pan/Tilt
Swap Pan/Tilt
Off (Default)
On
Invert Pan
Off (Default)
On
Invert Tilt Off / On (Default Off)
DMX Mode
16-bit Enh (Default)
16-bit
Note When doing a disable head motors, the lamp will shut off automatically as a safety action since lamp cooling is
related to shutter/strobe.
VARI LITE VL10 BeamWash User’s Manual