Van Der Stahl PTT-100 V, Operating Instructions Manual

Page: 39 / 48

PTT-100V Operating Instructions Ver.4.03E
39
DATA VIEW
PEEL DATA
MENU 15
DATA VIEW
DATA VIEW
VIU DATA
DATA VIEW
PEEL DATA
PEEL DATA 0100
090314 12:30:50
MAX 07.6N
SPEED 200mm/min
PEEL DATA 0099
090314 12:28:10
000.00mm 000.0N
000.04mm 000.2N
012.44mm 000.0N
012.48mm 000.0N
Not found
PUSH MENU KEY
Not found
PUSH MENU KEY
VIU DATA 0100
090314 12:30:55
PASS/FAIL FAIL
ERROR SAMPLE 2
VIU DATA 0099
090314 12:28:30
1 Access the menu in the right procedure.
2 The display now shows the right screen.
3 Use arrow buttons to select and press the
button to select.
4 When PEEL DATA is selected:
a) Select the desired test data with arrow
buttons. Press the button to select.
b) By pressing the arrow buttons, you can
view the value at each sampling point within
one peel test data.
c) Press the button to escape.
5 When VIU DATA is selected:
a) Select the desired test data with arrow
buttons.
b) Press the button. The test result will be
displayed on the screen.
c) Press the button to escape.
With this menu, you can check the stored test data with the PTT-100V.
12 <MENU 15> Data view
Counter Test time Test date
Attention
When no data is found, the
display shows the right
message on the screen.
Attention
When no data is found, the
display shows the right
message on the screen.
Counter Test time Test date