Van Der Stahl PTT-100 V, Operating Instructions Manual

Page: 15 / 48

PTT-100V Operating Instructions Ver.4.03E
15
0 : 0 : <ADMINIST>
<000000>
0 : 1 : <ADMINIST>
<000000>
0 : 1 : <ADMINIST>
<000000>
0 : 1 : <ADMINIST>
<123456>
1 Select ID number 0 for the administrator. Press the
arrow button so the letter indicated in the right
illustration flashes.
1 Press the arrow button so the letter indicated in
the right illustration flashes.
2 Press the arrow buttons to input a six-digit
password using a total of 6 numbers. Press
button to select the next letter.
3 Press button when you have completed the
input.
2 Use arrow buttons and change the setting
from “0” to “1” and press the key.
3
The administrator ID is now activated, and you can
now use the machine in the mode that utilizes an
administrator password. It is not possible to change
the administrator name.
4 To deactivate the administrator ID, change the
setting back to “0”.
6-5-1-2 Activate/deactivate administrator ID
6-5-1-3 Setting administrator password
Activate/ Deactivate the ID
indicates the selected letter that flashes.
indicates the selected letter that flashes.
0: Deactivated
1: Activated
Attention
To set the Administrator password, go to
the next process without pressing the
button.
TIPS
Only numbers may be used for registering
as a password.
Important! Note:
When registering the Administrator
password, be sure to note it and keep it in a
safe place.
If you forget your password, you may not be
able to operate the machine.
Van der Stahl cannot recognize or manage
passwords that customers have set.