Van Der Stahl PTT-100 V, Operating Instructions Manual

Page: 13 / 48

PTT-100V Operating Instructions Ver.4.03E
13
MENU 1
PATTERN SETTING
MENU 7
TIME ADJUST
MENU 13
LOT No. SETTING
MENU 2
UNIT SELECT
MENU 8
INITIALIZE ROM
MENU 14
SERIAL No. SETTING
MENU 3
RETURN MODE
MENU 9
DAILY INSPECTION
MENU 15
DATA VIEW
MENU 4
PEAK HOLD
MENU 10
SOUND SETTING
MENU 16
OPERATOR SETTING
MENU 5
DATE SETTING
MENU 11
BRIGHTNESS
MENU 6
TIME SETTING
MENU 12
INSPECTION MODE
Turn ON the power switch to “ ” position. The display
will show the software version such as “VO.01” and
the date and time few seconds later.
When the Administrator and Operator IDs are
registered and activated, the display will show the
password input menu before the date/time display.
Input the Administrator or Operator password of the
person who are going to use the machine.
If the inputted password is registered, the display will
show the corresponding ID. Put any button to display
date/time. For the detail of ID registration, please refer
to
“6-5-1 Administrator / operator ID registration.”
There are 16 menu’s available on the PTT-100V where
you can set and change functional settings. By pressing
button you will enter menu 1, where you can
customize the testing patterns. With arrow
buttons, you can scroll through the menu’s. For the
details of the settings, see the sections referenced for
each menu as below chart.
6-4 Turn ON the power switch
6-5 Initial settings
See section 6-5-13. See section 6-5-4.
See section 6-5-5. See section 9-1.
See section 6-5-6. See section 11.
See section 6-5-7. See section 6-5-8. See section 6-5-1.
See section 12.
See section 6-5-12.
See section 6-5-11.
See section 6-5-2. See section 6-5-9.
See section 6-5-3. See section 6-5-10.