Van Der Stahl PTT-100 V, Operating Instructions Manual

Page: 20 / 48

PTT-100V Operating Instructions Ver.4.03E
20
MENU 3
RETURN MODE
MENU 10
SOUND SETTING
MENU 4
PEAK HOLD
RETURN
ON
PEAK HOLD
OFF
SOUND
ON
RETURN
OFF
PEAK HOLD
ON
SOUND
OFF
1 Access the menu in the right procedure.
1 Access the menu in the right procedure.
1 Access the menu in the right procedure.
Return mode is the function to bring the grip base back to the starting position automatically after the peel test.
When the function is off, the clamp base stays at the end position until
button is pressed.
The beep sound for key touch can be turned off with this menu.
Access the menu in the following procedure.
Peak hold is the function to keep the maximum peel strength displayed on the screen. When the function is set to
OFF, the screen shows the real-time peel strength during the test.
The default setting of this function is off.
2
The display now shows the right screen.
Use arrow buttons to select and press the
button to save the setting.
2 The display now shows the right screen.
Use arrow buttons to select and press the
button to save the setting.
2 The display now shows the right screen.
Use arrow buttons to select and press the
button to save the setting.
6-5-6 <MENU 3> Return mode setting
6-5-8 <MENU 10> Beep setting
6-5-7 <MENU 4> Peak hold setting
TIPS The grip moving speed is 300mm/min
when returning to the initial position.