Van Der Stahl PTT-100 V, Operating Instructions Manual

Page: 3 / 48

PTT-100V Operating Instructions Ver.4.03E
3
100V
15A以下
200V
20A
100V
20A
200V
30A
100V
20A、30A
Before using, always verify the voltage specification of your particular unit and operate it at the
correct voltages. Please note the following.
1 The voltage specification of your unit is listed on the label which displays the serial
number.
This label can be found on the machine body.
2 Please confirm the plug configuration on your specific unit. The explanations and
illustrations in this operator's manual utilize the plug configurations most common in
Japan.
Thank you for purchasing the simple peel tensile tester PTT-100V.
Please read all of the safety and operating instructions before operating this machine. Periodic
maintenance and proper operation are necessary to ensure safety when using PTT-100V.
Keep this manual on hand when operating the PTT-100V.
As a result of research to further improve the PTT-100V, some details in the operating instructions
may differ from your actual machine. For operating problems or product information, please
contact
Van der Stahl Scientific .
Foreword
This manual is designed to cover machines of various voltages and
plug configurations
About the warning labels
The following marks are used in this manual to easily identify the conditions of risks, damages,
or some tips for the optimal use of your unit.
Caution
・・ Minor injuries or damages to the unit may occur when the instruction is
ignored.
Warning
・・ Severe injuries or fatal accidents may occur when the instruction is
ignored.
Danger
・・ Critical injuries or fatal accidents will almost certainly occur when the
instruction is ignored.
Attention
・・ Important Notes and Restrictions - Read the directions in order to avoid
misuse of the unit.
TIPS
・・ Great Tips and References when using the unit - Highly recommend
reading through the information.
Warning Voltages and plug configurations differ according to various worldwide specifications.
Always verify those of your particular unit before beginning operation. Connecting the
power cord to an outlet of a different specification is extremely hazardous.