![background image](http://html1.mh-extra.com/html/vamp/257/257_operation-and-configuration-instructions_3326944020.webp)
VAMP 257
Feeder and motor manager
Operation and configuration
VAMP Ltd
20
VAMP 24h support phone +358 (0)20 753 3264
VM257.EN002
4.
Operating measures
Study carefully the operating instructions presented in
chapters 1 to 3 in this manual before taking any operating
measures or changing any manager settings or functions.
The manager can be controlled via the manager front panel, a
PC running the VAMPSET software, a PC running suitable
manager software or via a remote control system.
4.1.
Control functions
The default display of the local panel is a single-line diagram
including manager identification, Local/Remote indication,
Auto-reclose on/off selection and selected analogue
measurement values.
Please note that the operator password must be active in order
to be able to control the objects. Please refer to chapter 0.
To toggle Local/Remote control:
1.
Push the ENTER key. The previously activated object
starts to blink.
2.
Select the Local/Remote object (“L” or “R” squared) by
using the arrow keys.
3.
Push the ENTER key. The L/R dialog opens. Select
“REMOTE” to enable remote control and disable local
control. Select “LOCAL” to enable local control and
disable remote control.
4.
Confirm the setting by pushing the ENTER key. The
Local/Remote state will change.
To control an object:
1.
Push the ENTER key. The previously activated object
starts to blink.
2.
Select the object to control by using the arrow keys.
Please note that only controllable objects can be selected.
3.
Push the ENTER key. A control dialog opens.
4.
Select the “Open” or “Close” command by using the UP
and DOWN arrow keys.
5.
Confirm the operation by pushing the ENTER key. The
state of the object changes.