VAMP 257
Feeder and motor manager
Operation and configuration
VAMP Ltd
12
VAMP 24h support phone +358 (0)20 753 3264
VM257.EN002
3.
Local panel operations
The local panel can be used to control objects, change the local/
remote status, read the measured values, set parameters, and
to configure manager functions. Some parameters, however,
can only be set by means of a PC connected to one of the local
communication ports. Some parameters are factory-set.
3.1.
Navigating in menus
All the menu functions are based on the main menu/submenu
structure:
1.
Use the arrow keys UP and DOWN to move up and down in
the main menu.
2.
To move to a submenu, repeatedly push the RIGHT key
until the required submenu is shown. Correspondingly,
push the LEFT key to return to the main menu.
3.
Push the ENTER key to confirm the selected submenu. If
there are more than six items in the selected submenu, a
black line appears to the right side of the display (Figure
3.1-1). It is then possible to scroll down in the submenu.
4.
Push the CANCEL key to cancel a selection.
5.
Pushing the UP or DOWN key in any position of a sub-
menu, when it is not selected, brings you directly one step
up or down in the main menu.
The active main menu selection is indicated with black back-
ground color. The possible navigating directions in the menu
are shown in the upper-left corner by means of black triangular
symbols.
Figure 3.1-1. Example of scroll indication
