VAMP 257
Feeder and motor manager
Operation and configuration
VAMP Ltd
10
VAMP 24h support phone +358 (0)20 753 3264
VM257.EN002
2.2.2.
Menu navigation and pointers
1.
Use the arrow keys UP and DOWN to move up and down in
the main menu (1), that is, on the left-hand side of the
display. The active main menu option is indicated with a
cursor (3). The options in the main menu items are
abbreviations, e.g. Evnt = events.
2.
After any selection, the arrow symbols (4) in the upper left
corner of the display show the possible navigating directions
(applicable navigation keys) in the menu.
3.
The name of the active submenu and a possible ANSI code
of the selected function are shown in the upper part of the
display (2), e.g. CURRENTS.
4.
Further, each display holds the measured values and units
of one or more quantities or parameters (5), e.g. ILmax
300A.
2.2.3.
Keypad
You can navigate in the menu and set the required parameter
values using the keypad and the guidance given in the display.
Furthermore, the keypad is used to control objects and switches
on the single line diagram display. The keypad is composed of
four arrow keys, one cancel key, one enter key and one info key.
Figure 2.2.3-1 Keys on the keypad
1.
Enter and confirmation key (ENTER)
2.
Cancel key (CANCEL)
3.
Up/Down [Increase/Decrease] arrow keys (UP/DOWN)
4.
Keys for selecting submenus [selecting a digit in a
numerical value] (LEFT/RIGHT)
5.
Additional information key (INFO)
NOTE!
The term, which is used for the buttons in this manual, is
inside the brackets.
