Valor Fires 954, Installer And Owner Manual

Page: 6 / 64

CONTENTS (Continued)
Section Heading Page
10. BURNER INSTALLATION 30
10.1 Burner and supply pipe installation. 30
10.2 Lighting the burner. 30
10.3 Operating the burner. 30
10.4 Inlet pressure check. 30
10.5 Fitting the burner tray trim to the Brooklyn, Chic and Moonlight models. 31
11. FITTING THE FASCIA 32
11.1 Assembling the ‘Luxor’ and ‘Opulent’ fascia. 32
11.2 Assembling the ‘Westminster’ fascia. 32
11.3 Assembling the ‘Heritage’ fascia. 33
11.4 Fitting the ‘Luxor’, ‘Opulent’, ‘Heritage’ and ‘Westminster’ fascia. 33
11.5 Fitting the ‘Willoughby’ fascia. 34
11.6 Fitting the ‘Chic’ and ‘Envy’ front fascia. 35
11.7 Fitting the Brooklyn and Moonlight fascia. 37
12. FITTING THE CERAMIC FUEL EFFECT 37
13. FULL OPERATING CHECKS 38
13.1 Recheck the control settings. 38
13.2 Lighting the burner. 38
13.3 Operating the burner. 38
14. SPILLAGE & FLAME SUPERVISION CHECKS 39
14.1 Check for spillage. 39
14.2 Flame supervision and spillage monitoring system. 39
15. FINAL REVIEW 40
16. SERVICING & PARTS REPLACEMENT 42
16.1 Checking the aeration setting of the burner. 43
16.2 To remove the ignition microswitch. 43
16.3 To remove the gas shut-off microswitch. 43
16.4 To remove the fascia. 44
16.5 To replace the slider control button. 45
16.6 To remove the burner unit. 45
16.7 To remove the electronic ignition generator. 46
16.8 To remove the thermocouple interrupter block. 46
16.9 To remove the pilot unit. 46
16.10 To remove the shut-off tap. 47
16.11 To remove the gas flow rate controller. 48
16.12 To replace the burner. 48
16.13 To remove the main burner injector. 49
16.14 To remove the appliance from the fireplace. 49
Page 6
©
Baxi Heating U.K. Limited 2010.
INSTALLER GUIDE